
-
£120.00 ex. VAT £144.00 inc. VAT - Code: 2200CP
Overview
Single Sensor and Twin Sensor Gas Alarms
For use with detection of Butane/Propane gases.
Pilot Mini Single Sensor Gas Alarm
This is the entry level, single channel gas alarm. It has one gas detection sensor on a 3.5 meter length of 3-core cable. It has the capability to be linked to a Gas Valve Controller to shut off the gas supply, or a relay to bring on blower fans. The unit draws 90 milliamps at standby rising to 100 milliamps in the event of an alarm.
Dimensions: 35mm x 53mm x 100mm
Pilot Dual Twin Gas Alarm
This is the Mini Gas Alarm's big brother. It has all the features of the Mini, but with the added benefit of two sensors on 3.5 meters of 3-core cable. The Dual Gas Alarm, or Twin, has been recently redesigned with some useful extra features:
It has been given an extra terminal on the board so that a relay can be added to activate the blower fans in the event of an alarm.
This extra terminal can alternatively be used as a network terminal to allow any number of Dual Alarms to be 'chained' together. This is particularly useful on larger vessels as it allows you to have a Control unit and at least one detector in most rooms, yet if the unit at the other end of the vessel alarms, all the units will activate. The unit that detected the original leak will be identifiable by a bright LED.
The twin is designed for use with a 12/24 volts supply and draws 180 milliamps at standby, rising to 210 milliamps in the event of an alarm.
Dimensions: 35mm x 65mm x 120mm.
Please advise when ordering if you require 12 or 24 supply.
If you are confused or not sure of your exact requirements to comply with the Code of Practice, then let ADEC Marine work it out for you. Safety check list request
Follow us